Legal Law

Typographic refinements

Attractive and effective documents are built on typographic consistency and moderation. In general, avoid using more than two fonts on a page of three if you include a symbol font for the final labels and lists. Many great looking documents rely on a single sans-serif typeface for headings and subtitles with a second serif typeface for text and subtitles.

Effective typography relies on moderation and consistency. Avoid last minute compromises, such as reducing font size, line spacing, or letter spacing to “tighten” text. Also, avoid increasing the specification of the text to fill the space. The keys to effective typography lie in consistency, moderation, and attention to detail. Replace “typed” characters with “compound” punctuation whenever possible. For example, replace two hyphens with a single em dash named Em hyphen. Replace a single hyphen (used for compound words) with an En hyphen, which is slightly longer than the hyphen.

Also, be sure to use “open” and “close” quotes instead of vertical ones. Some programs perform the substitution automatically; others trust you to do it. Typography is a time-honored craft and an important one that all desktop publishers must learn.

By taking advantage of the wide variety of typographic alternatives available in the desktop publishing system and by using the full range of spacing controls at your disposal, you can avoid a “desktop” appearance and get closer to the work of traditional typographers. Strive to approximate the look of traditional typesetting.

The importance of visual elements such as photos, illustrations, charts and graphs that can be used to emphasize and / or enhance your message.

Lifestyle Fashion

Use caution with Do Not Resuscitate (DNR) in Living Wills

All people, including attorneys, should be careful with living wills and the do not resuscitate (DNR) clause. Our relative, who was an Emergency Medical Technician (EMT) for 17 years, said that he would not sign a DNR because he thought that doing so would allow doctors to cause his death. We respected their decision, but we couldn’t believe that primarily life-sparing physicians were eager to end life. However, as it turns out he was right, a Do Not Resuscitate (DNR) document gives a green light to a nursing home or doctor to determine when or if a person can receive life-preserving medical care.

When you are signing paperwork to place your loved one in a nursing home, they will tell you how humane a Do Not Resuscitate (DNR) clause is, which does not require cardiopulmonary resuscitation (CPR) and / or a defibrillator that can break the ribs of your loved ones. . However, they do not tell you how bad it is for your loved one if they lose their mental or physical faculties unable to communicate their wishes for medical care and indifferent people determine that the DNR means that they do not want medical care to extend their lives. Although my wife had a power of attorney requesting medical care for her father, the nursing home staff simply ignored us and ignored our attempt to preserve the life of our family member.

Turns out they had our relative sign a DNR while he was in the brain fog of an infection. The doctor made a misdiagnosis claiming that this patient’s daughter (my wife) was mentally ill for trying to honor her father’s last wishes. She was unable to communicate properly with her father, so she had reservations about approving an amputation of her leg without his consent, which I thought was prudent. This doctor had never met or spoken to my wife and we had no psychiatric credentials that we know of. But when a doctor makes an entry in a medical record, it carries powerful weight in court, even if the information is false. So the nursing home staff took the point of view of the doctors stating that my wife was insane for trying to preserve her father’s life therefore instead of governing her rights as a power of attorney and they were going to erase legally the life of his father that he wanted to live.

Therefore, a DNR in some circumstances can be more powerful than a power of attorney. I don’t think we are the only victims of this abuse of a DNR clause that some wrong people use to prematurely extinguish the value of human life. The common practice with the fervent sales pitch to get family members to sign a DNR outside of humanity can be valid to some extent, but it can also be abused by people who believe they have the right to determine when a person dies.

It is advisable to include a clause or add a handwritten note stating that the DNR does not give either party the right to deny your loved one medical care. A DNR has the ability to turn a doctor or nursing home staff into a psychopath and you should have reservations about signing such a document.

Pets

What happens during a dog daycare temperament test?

Many pet parents are interested in enrolling their dogs in a reputable dog daycare program, whether they want a safe and social place to leave their furry children while they work, an occasional day out, or to give them more. opportunities to have fun while in the accommodation. . To participate in doggy daycare or group play, most high-quality facilities will require their canine children to be spayed or neutered, up-to-date on vaccinations (vaccination requirements may vary by area of ​​the country), in routine flea and tick control. and in good health. They will also typically require your dog to pass a temperament test assessment to determine if he is a good candidate for social play with other dogs.

So what happens during a temperament assessment? While the exact process may vary between different installations, most will include the following steps:

1. A preliminary application, where you may be asked to provide information about your dog’s basic personality, his home life (particularly additional pets), how he responds to new people, how he responds to new dogs, and what he likes to do. The app can also address any aggression issues … for example, does it protect food or toys? Have you ever bitten someone? The answers will not necessarily prevent you from being accepted into a program, but they do give the nursery staff an indication of things to keep in mind during group play.

2. A scheduled time for your dog to enter the test. Some facilities will allow (or encourage) you to stay and watch so that you can see for yourself how your dog reacts. Others prefer that you not be present since, like children, dogs may respond differently to the situation if they know that their mom or dad is there. Both views have merits, and you should be open to whatever protocol that facility has established.

3. During the test itself, again, the exact procedure will vary between facilities, but generally includes the following stages. They will usually start your dog on a “long” leash, so that he feels some freedom of movement, but the staff can still control the situation. Your dog will be able to explore the test area (room, yard, etc.) without other dogs present. The staff will then begin introducing your dog to other previously approved daycare dogs. A general rule of thumb is that they will start with a submissive personality of the opposite sex (on a leash) and will look for their dog’s reaction and the dog’s presentation skills. Approaches gently in a circular motion, with sniffing and other appropriate behaviors? Are the two dogs properly interacting with each other?

If the first presentation goes well, they will take the first test dog off the leash (with their dog still in the long line) and bring a second dog, usually submissive of the same sex, and repeat the introductions. If things continue to go well, they will stick with a more dominant personality of the opposite sex followed by a more dominant personality of the same sex. If your dog is doing well, displays appropriate behaviors with all the dogs in the group, and seems comfortable, then they will start adding several more daycare dogs to the playgroup and again judge your dog’s reactions and comfort level. The process can be fairly quick, if your dog responds appropriately and happily, or it can take half an hour or more if your dog shows signs of discomfort. The behaviors they want to see in a daycare dog are appropriate dog introduction skills, fluid play between dogs with a lot of movement and change of position, knowing when to “back off” if another dog gives a signal that your dog is too much on his ” Bubble “and appropriate warning behaviors from your dog to tell another that you are uncomfortable, without resorting to aggression. It’s also important that your dog responds to your name when called (you’d be surprised how many don’t!). Come when called and respond to “shut down” or “leave” commands if staff need to get you out of a potentially dangerous situation. Inappropriate behavior includes overt aggression towards other dogs or staff, too much protection from particular toys, or sometimes being too submissive or intimidated by a large pack. In the latter cases, your dog may be approved for daycare, but the attentive staff will probably let you know that you can enjoy a smaller group or individual play with the staff rather than a large group setting … assumes that daycare is fun and not stressful!

Once the staff is reasonably certain that your fur child has good dog-play manners and is having a good time, they will remove your pet’s leash and continue to closely monitor his off-leash behavior during the testing period and the rest of your first day. Most facilities that follow the recommended dog daycare guidelines (see Pet Sitting Services Association Standards and Practices) will have a rule that a dog is always on probation, which means if your behavior changes over time and becomes aggressive towards other dogs or staff, can be removed from the program for everyone’s safety.

So why do some dogs do well in some nurseries and not others? Like people, different dogs may respond differently to each other, to different staff members, and to different program settings and structures. Some combinations of dogs (for whatever reason) don’t mesh well with each other. Just because your dog is not doing well in a certain program on a certain day does not mean that he cannot participate in another program … or even the same program on a different day of the week with different dogs. Well-trained staff who understand dog behavior, breed characteristics, and pack dynamics should be able to tell you if your dog could do better in a different group, in a different facility, or with a different group of dogs. or if it really isn’t. a good candidate for group play based on fear or insecurity, aggression, or the fact that you would simply rather be with people than other canines.

Real Estate

Homeowners Insurance FAQs: Understanding Homeowners Insurance

What is the difference between rebuild and replacement cost coverage? – It is important to understand that the rebuild cost (replacement value) is the amount that the insurance company estimates it will cost to completely rebuild the property from ‘scratch’ with materials similar to the current labor rate and materials cost in the area. geographic location in which the property is located. This amount also includes ‘soft costs’ often overlooked or forgotten, such as architectural fees, permit fees, and the cost of demolishing and / or removing the damaged structure prior to reconstruction. From a strictly insurance-based perspective, the cost of rebuilding a home has absolutely no relation to the purchase price of the property, the amount of the mortgage loan, the appraised value, or the market value. In other words, the rebuild cost is a completely independent value with no correlation to any other property-related value. For example, you may have purchased a property that was appraised at a market value of $ 230,000, but due to the seller’s personal situation, you were able to negotiate the terms and buy it for $ 180,000. After providing a 20% down payment of $ 36,000, your home loan balance is just $ 154,000. Although there are several different values ​​associated with this property, none of them have anything to do with what it may actually cost to completely rebuild it after a loss.

How are reconstruction costs determined? – Another common area of ​​misinformation for homeowners is how the insurance company actually determines the cost of rebuilding a property. Contrary to common belief, this is not simply a “blind guess” as to the cost of replacing the property. This formula is a bit complex and can vary somewhat from company to company depending on the data points used, but the process (which is simplified below) is generally the same. Most companies in the United States pay an enormous amount of money each year to have full access to the Marshall & Swift / Boeck (MSB) construction database. This is an experienced and highly respected outside company that maintains accurate construction costs (materials and labor) for every ZIP code in every county in the United States. This database is updated every 90 days and is usually very accurate. When requesting a new quote for property insurance, your agent may ask you many questions about the physical characteristics of the property, such as square footage, number of floors, type of construction, roofing material, walling material exteriors, the floor coverings that are used, etc. The purpose of these questions is to understand exactly how your property is built so that this information can be entered into the carrier’s rebuilding cost software. Once this data has been obtained and entered into the system, the software works with the MSB database to compare the labor and material costs for the area and determine a fairly accurate amount of what is expected. cost to rebuild the property with current labor and materials. rates. The reason that two different companies may have two completely different rebuild costs, even when using the same data, has to do with how the company calculates its own internal cost estimate, not with the company’s database. MSB. For example, company ‘A’ may develop a rebuild cost of $ 100,000, but within their internal calculations, they can add an additional 20% for labor costs, 5% for ‘soft costs’ and 22% for materials while the Company ‘B’ uses only the hard costs provided by Marshall & Swift / Boeck. The purpose of this is to err on the side of caution and attempt to include an additional margin to compensate for any unforeseen fluctuations in actual costs after a loss. The rebuilding cost formula for each company is proprietary and agents have no exact idea how each company calculates the final cost or what margins are included. All agents have access to the final estimated replacement cost.

Can two properties built exactly the same have different rebuilding costs? Absolutely! Labor and material costs can vary greatly from one geographic area to another. For example, here in Texas, a home in El Paso may cost $ 150,000 to rebuild or replace; however, that same home, with exactly the same size and physical features, can cost $ 210,000 to rebuild or replace in Houston. The reason for this, as already mentioned, is due to local building codes, labor rates, material costs, and other similar issues.

Why are rebuilding costs for new properties greater than the builder’s sales price? – A common point of disagreement between the owner of an insured property and their insurance company is that the cost of rebuilding a property is much more than the actual purchase price of a new home that was recently built. From the client’s perspective, you may have only paid $ 200,000 for the property, which includes the builder’s construction cost, as well as the capital, land, and everything else involved, but the insurance company determines that the cost of replacement is actually $ 225,000. The client often cannot understand why the rebuilding cost for the insurance company is so much higher than for the builder and often argues that the property is overinsured. This is a logical point of view; however, this is simply not the case. When a land builder builds a new home, its construction cost is much less than that of a custom builder. The reason for this is simple. When a land builder builds a new home, they are generally building many more at the same time and in the same subdivision or geographic area. This means that the builder often purchases millions, if not tens of millions of dollars, in bulk supplies and materials. This allows the builder to obtain large volume discounts on prices, greatly reducing their overall construction costs. Additionally, the builder can use the same labor crews for framing, concrete work, and all other phases of construction. Because the builder is providing a constant, repeatable flow of work to his subcontractors and these subcontractors are working for extended periods in the same areas, the labor rate is also greatly reduced. This is not the case with regard to custom constructors. Rebuilding a property is always more expensive than new construction for the first time. If your two-year home that you bought from the original builder for $ 200,000 is destroyed in a fire, the contractor or builder you hire to rebuild the home will not have the same deep discounts on their labor and material costs. Plus, you’ll have the added expense of obtaining new plans, architectural and permitting fees, debris removal, etc. which the original constructor did not have or which was also greatly reduced. This means that rebuilding your $ 200,000 home can cost $ 250,000.

Why does it often cost more to rebuild older properties? It’s also important to understand that rebuilding older properties can cost even more. In addition to all the other aspects already outlined, older properties may have unique architectural features that are difficult to replicate with current codes and materials and some of this work may require a craftsman who specializes in things like tin roofs, ornate trim and similar works. ; all of which add to the cost of construction.

Are rebuilding costs automatically updated when my insurance policy is renewed? Yes and no, it depends on the company that issues the policy. Most standard companies automatically reprocess the rebuild cost when a policy is renewed using the information previously provided. This is why homeowners can see both their premiums and rebuilding costs increasing annually. However, if improvements or alterations have been made to the property, such as room additions, elevation changes, interior remodels, or other similar changes, the rebuild or replacement cost listed on the policy will be inaccurate as it does not include these new ones. modifications unless the insurance company is notified and this new information is included. That is why you should always contact your agent whenever you make changes to your home or property that may affect the final cost of rebuilding.

In short, there is much more to properly insuring your property for its actual replacement value than simply taking a number out of thin air. There is a well-established and methodical process for determining actual costs that can be incurred, and there is little or no relationship between the cost of rebuilding a property and the amount of the loan, appraisal, lien, or market value. These numbers are completely independent of each other and it is your responsibility, the property owner and the insured customer, to ensure that your policy contains sufficient coverage to fully indemnify you (financially compensate you) or replace the property in the event of a loss. .

Shopping Product Reviews

Samsung Galaxy Tab 2: should it or shouldn’t it?

There are a number of models that are being launched by the Samsung company, in regards to mobiles, laptops, tablets and more. There was the Samsung Galaxy tab that started on Samsung tablets. Then there was no going back. Although the first galaxy was not a great success, there was a great welcome on the other days that followed.

There are a number of things that are improvised on the Samsung Galaxy New Tab 2. Although there are a number of great things added to this tablet device, there are a number of things that have to be considered from the users side. . The main thing would be the concern about the weight in which the device goes. After a year of launching the first of the Galaxy tablets, it was time for the next round. That’s when the Galaxy Tab 750 and Galaxy Tab 730 were released. There are a number of features that these two tablets have in common. They are similar in most technical respects. There are only differences seen in the case of screen sizes.

Samsung Galaxy Tab 2 has a number of good things built into it. They include the following things that are mentioned here. Instead, they have increased their technical weight. They are actually thicker than the original version. There is the 8.9-inch screen that has a resolution of 1280×800 pixels. There is the other model in the same series that has a screen size of 10.1 inches. Image and video clarity are very good in this case. There are a number of other good things that would include the speaker grilles that are placed on either side of the tablet.

The quality of the audio they produce is good, but chances are that you tend to cover them up when you hold them by the sides. This would result in a muffled volume coming out of the device. Although the audio quality was not as good as the Xoom, the music was clear enough. The screen is also very clear and good. There are also the internet options that are available on this tablet model that are pretty good. You are trying to go ahead with the 3G models that are available on the market; There is also Android 4.0 which is the latest on the market.

Sports

Keep your eyes on the Internet of Things

Last week investors received a surprise welcome breakfast. Mobileye (NYSE: MBLY) went up 30%.

Intel, the mega-chip company, decided to buy Mobileye, a developer of automotive sensors, in a $ 15 billion deal, quickly generating huge profits.

The thing is, if you look behind Intel’s decision to buy Mobileye, you’ll see a topic that I’ve been talking to you about for some time: self-driving or autonomous cars, which is a critical component of the Internet of Things mega-trend that is going on. developing right now. And as you can see, people are making huge amounts of money fast.

Now, there are two developments related to the autonomous car theme that have the same potential and that are also happening right now.

Rise of the Machines

You see, the car is transforming from a mechanical machine, which means that it is driven by things like pistons and gears, to one that is electronic. Second, the car is turning into a machine that is connected to the Internet all the time and so connectivity is something that can be used as a shared resource.

Related to these things is the fact that due to laws that have been passed around the world, virtually every automaker is gearing up to make most cars electric.

So, in other words, the whole way of making a car will be uprooted and changed.

This means that it is a time of incredible opportunity and, equally, of tremendous risk.

Of course, the companies that make the components that are to be integrated into this electronic, connected, shareable, and eventually electric car will benefit.

And the companies that are left behind, betting on mechanical cars, disconnected, that cannot be shared and that run on fuel, are going to go bankrupt.

The model of the future

The turning point, I think, will come later this year when Tesla launches its Model 3 car.

The reason I think the Tesla Model 3 is the key is because it will be the first car to have pretty much all of the things I mentioned. It’s electric, packed with electronic components rather than mechanical, and has the latest in autonomous driving capabilities. The Model 3, like all Tesla cars, is connected to the Internet non-stop.

According to news reports, more than 400,000 people have reserved a Model 3. Now, remember that these reservations are high-commitment – you had to put down $ 1,000 to do so. And the list price is $ 35,000.

When you do the math, it means Model 3 is setting up to be a $ 14 billion product right out of the box.

Now, $ 14 billion seems like a lot, but it’s nothing compared to the $ 147 billion General Motors is expected to generate in sales in 2017.

So in terms of overall car sales, Model 3 sales are a drop in the bucket.

The race is on

What will really surprise investors is how profitable the Model 3 will be compared to mechanical fuel-powered cars. That’s because, in addition to the battery, components like the ones in your computer are much cheaper than the mechanics that go into your car.

And when investors see this, all hell will break loose. You’ll see the stocks of some electronic component manufacturers skyrocket and the stocks of mechanical car manufacturers and their suppliers plummet.

I think deals like Intel buying Mobileye, GM buying autonomous car startup Cruise Automation for more than $ 1 billion in March 2016, and Ford buying a similar startup, Argo AI, for $ 1 billion, as well as other events with Google. And Uber, it’s all down to the fact that the race kickoff to dominate the electronic, electric, connected, shareable, autonomous car is about to explode. And people expect the race to be hotly contested between tech companies like Google and Intel, and auto companies like GM, Ford, Tesla, and others.

However, I think that the smart bet on this new type of car is an investment in the electronic guts of the car. And I still believe it. You can expose yourself to many of the companies that make these electronic casings by purchasing the VanEck vectors Semiconductor ETF (NYSE Arca: SMH).

Tours Travel

Tips and information on the venue for the 2010 Vancouver Winter Olympics

The 2010 Vancouver Winter Olympics are just around the corner. February 12-28, 2010 … the world of winter sports will converge on magnificent Vancouver, British Columbia. This will be the first time that this Canadian city will host the Winter Games. If you have never been to Vancouver, you will be pleasantly surprised by its diversity and beauty. As the third largest city in Canada, Vancouver and its surroundings offer all the necessary amenities for a comfortable and enjoyable visit to the Winter Olympics.

Planning to attend some events at the upcoming 2010 Vancouver Games? Here are some things to know about the venues that will host the 17 events of these Winter Games …

PROPERTY VANCOUVER

The Opening and Closing Ceremonies will take place at BC Place Stadium in downtown Vancouver. Nearby Canada Hockey Place will host some ice hockey games, as will UBC Thunderbird Arena. The Vancouver Olympic Center will host all curling events, and the Pacific Coliseum will host short track speed skating as well as all figure skating events.

RICHMOND, BC

Richmond’s huge Olympic oval is the site of all speed skating events. Richmond is a suburb of Vancover in the southern part of the city and is located just south of the Vancouver International Airport.

VANCOUVER WEST, BC

Cypress Mountain will host all freestyle skiing and snowboarding competitions including moguls, antennas, ski cross, half-pipe, snowboard cross and giant parallel slalom. Cypress Mountain is about an hour’s drive north of Vancouver International Airport.

QUIET ZONE

For all remaining events, you must head to the mountains and to the beautiful Whistler Resort area, which is a 2-hour drive north of Vancouver International Airport. Three locations in close proximity host a multitude of events. Whistler Creekside will host all alpine skiing events including: Super-G, Giant Slalom, Super Combo and Slalom. These take place in the Whistler Blackcomb ski area. Whistler Olympic Park will host all Nordic events, including: Biathlon, Cross Country Skiing, Nordic Combination and Ski Jumping. Last but not least, the Whistler Sliding Center is a bobsleigh, luge and skeleton track that will host all of the 2010 Games sliding events.

PLANNING YOUR TRIP

To maximize your Vancouver 2010 experience, a good travel strategy is to stay for several days in the Vancouver area combined with several days in the Whistler area. Events at both locations are spread across the 17 days of the games, so you’ll find events to watch no matter what day. Tickets can be purchased through the official Vancouver 2010 website, and there are many hotels adjacent to all Olympic venues (but book as early as possible to ensure availability).

Technology

How to run the barrel roll

The BEST way to practice the barrel without killing yourself on the mountain first is to practice on a trampoline. Practice your rotation only with yourself and your body. Make sure that when you are midway in the air (upside down) you are looking at the ground to position your landing, make sure that when you are midway in the air. This is crucial for detecting where it will land by looking at the middle of its rotation.

Do not hold the board at your feet and get on the trampoline. Your goal is to get high enough to flip, rotate, and generally land in the same position. On the mountain you don’t want to turn around and move 5 feet to the left or right. You want to stay focused and maintain as much balance as possible outside of the throw. Once the rotation is down, the rest will be smooth.

Now, on the mountain, obviously, this is MUCH different than jumping on a trampoline. This move is more aimed at advanced snowboarders who have very good handling of their riding. If you are just starting out I would NOT suggest this trick, if done incorrectly it can be very risky and maybe fatal. I’ve fallen MANY times perfecting the barrel roll and I’m telling you, it doesn’t tickle! The snow is soft but it won’t hit it from 12 feet in the air!

Once you’ve flipped down on the ground or the diving board … you’re ready to kill the barrel. Here’s the breakdown … Approach your kicker with a little more speed than usual to completely CLEAN the plane from your space. You do NOT want to land in the middle of the jump you want to get away by landing softly on the landing. I suggest you hover over your desired kicker a couple of times to get good judgment and an idea of ​​speed. THEN …..

Approach the jump with enough speed to clear the landing, when you get close to the lip … keep your knees bent and the moment your nose breaks your lip jump into the air and push as hard as you can from the kicker. The KEY is right here … PLACE YOUR KNEES on your chest for a GOOD rotation. Now you have a board tied to your feet PLUS all your clothes and boots and it adds weight and takes a bit of rotational speed on your flip.

So make sure you SNAP the rotation quickly while at the same time … in the middle of the rotation look at the ground and find your place. ONLY Unfold when you have completed approximately 270 rotations. If you do it earlier, you could be rolling in your stomach … not good. So LIP JUMP … TUCK Knees to Chest … Turn Halfway and Look Down to Land … Unhook about 270 rotations and land BOTH feet at once. Don’t land on a manual, sometimes that is hard to handle.

Home Kitchen

Upgrade your bedroom with plexiglass closet doors

Giving your traditional bedroom, or any room in your home, a contemporary look has never been easy with plexiglass closet doors. It can have louvered, folding, accordion or bypass doors with Plexiglas.

Plexiglass is a great closet door material for everyday use because it won’t break or crack easily. You will have no problem adapting it to your modern home decor because it comes in various designs and finishes. Check out some of the offers from online retailers (eco-furniture.com, Prontohome.com, etc.) and compare their prices before making a purchase decision.

Acrylic Doors Coloran:

Sturdy in style, this door is perfect for use in almost every closet in your home, from closet to pantry to laundry room. It is resistant to moisture, steam and can withstand humid or wet conditions. Therefore, there is less chance that this door will lose its shape or become deformed.

Plexiglass doors:

This sliding door can be a great addition to your shelving system. You can mix and match the various colors available to create a unique look in your bedroom or any room in your home. You can combine the colors with a transparent or matte door. The sheer number of design options available for this door only shows its flexibility.

Cabinet with plexiglass door:

This children’s cabinet features a plexiglass door that makes it safe for your children’s room. The closet has three adjustable shelves and a hanging bar where you can easily hang your clothes. Some of its standard features are hand-painted designs and decorative iron scrolls. For optional features, you can have knob handles in gold and silver finishes, smooth glass, and decorative iron rolls in burnished gold, white, and antique silver finishes. Meanwhile, the door is available in four finishes, namely red, white, navy and black. The door is constructed of Asian wood, solid medium density fibreboard. The dimensions are 19 ¼ inches wide, 39 inches long, 60 inches high, and 125 pounds in weight.

SLIM-5 Series Doors:

This plexiglass door is ideal for any room in your house. You have the option to swing to the right or to the left. Standard features are a recessed handle and cam lock. Prices vary based on your choice of design, hardware, and weight. For example, a door that weighs 18.3 pounds sells for $ 550.34, $ 509.10 for a door that weighs 14.8 pounds, $ 687.94 for a door that weighs 28.45 pounds, while a 23-pound door sells for $ 591.62.

Plexiglass door from Chatsworth Products Inc .:

Chatsworth offers this replacement door in a number of styles including Solid, Vented, Weathered Perforated Metal, or High Flow Style. You have the option to remove and install to open from the left or right. This door is also perfectly suited to cabinets designed with side panels. It comes pre-installed with locks and keys. A 63 percent opening area is available for the perforated door style for increased ventilation.

Mid-Atlantic SCRK Series Plexiglass Front Door-PFD-44:

This door can be installed with a left or right turn. Standard features are cam lock, attractive recessed handle, metal hinge, and lightly smoked Plexiglass. It fits well within a 1.5-inch door opening clearance and has a textured black powder coat. Sizes are 22 inches wide and 77 inches tall.

Digital Marketing

Five tips for effective web content writing

Over the years, web content writing has grown into a million dollar industry. Business owners hire skilled and experienced content writers because they want their websites to look professional so that visitors are interested in purchasing their products. But writing web content can become tedious work, especially for newbies. An effective content writer should follow the following five essential writing tips.

  1. Researching the keyword: This is the first and most important aspect of content writing. Since most marketing is done through search engines, it is very important that you understand which keyword to target. If you spend hours of your precious time not targeting fast keywords, it will all be for naught.
  2. Writing original content: The secret to being a successful content writer is to avoid plagiarism at all times. Plagiarism, in simple words, copying, is considered a serious crime in the writing industry. You can do extensive research to generate ideas, but you cannot, in any way, copy the language or content of others. If you can’t produce 100% new content, you lack the number one skill to be a successful content writer.
  3. Flawless writing: Successful web content writing means being able to write flawlessly. You must bear in mind at the time of writing that it is your readers who have to be glued to your content. If you make linguistic mistakes in their writing, there is little chance that they will finish reading your writing. Even if they do, they may not take any action based on reading your content. But that is not all; Your writing should also include words that surprise your readers. The most essential writing quality also includes being able to add words in writing that create images in the minds of readers.
  4. Avoiding irrelevant information: Your writing has to be direct and to the point. When writing, keep in mind that your readers are looking for specific information on a certain topic, not irrelevant additional sentences.
  5. Add call to action: Let me ask you a question. What is the main purpose of your writing? In one hundred percent of cases, web content is written with the aim of asking readers to act. If you don’t include a call-to-action message at the end of your writing, it would mean losing out in the world of competition.

Finally, web content writing is an art form. Every word you use in your writing should come directly from your heart. The more passionate you are about ensuring quality writing, the better your chances of becoming a successful content writer.