Technology

Are they 5 inches large? Maybe for a child! 6.5 inches is average, and yes, size does matter! Frequently asked questions answered

Is it 5 inches large? No, unless he is a prepubescent boy. The average size of a grown man is 6.5 inches (still much smaller than what you normally see in adult movies), and size does matter for women. With a long, thick penis you can fill a woman up and give her that “helpless” feeling that drives her crazy, and you can create enough friction as you thrust to send her clit into ecstasy. Here are the answers to the most frequently asked questions about penis size and how you can enlarge yours.

How big do I have to be to be considered “hung”? What size is considered “small”?

Well, the average is 6.5 inches, but it’s also worth noting that more than two-thirds of men are between 6 and 7 inches tall. Most guys (and girls) consider anything over 7 inches to “hang” and anything under 6 inches to be “small.” Of course, the circumference also matters. The average girth is 5 inches, and most men are between 4.75 and 5.5.

Is length more important than circumference?

Length and girth are equally important. Length matters because it allows you to caress long, hard and deep from any position, while girth allows you to create enough friction to really activate her nerve endings, as well as her clitoris (located on the outside of her vagina) while you are thrusting.

How can I permanently enlarge my penis?

The best way is with natural penis enlargement exercises, which are done only with your hands. There are exercises that target length, girth, and both. Study them all and determine which ones you should do to get the size gains you are looking for. Then go with a proven routine like the one I did. I went from 5.5 inches to very well endowed, and you can also make big (and permanent) gains and start seeing them in just two weeks!

Home Kitchen

Designing your kitchen for your budget

“How is it that it costs so much?” That must be one of the questions I hear most frequently when presenting price quotes for kitchen cabinets to homeowners. While it’s true that cabinets can be designed to be low-budget, mid-range, or high-end, there are many factors involved that can easily push a low-budget project into a higher price range.

The place to start when designing kitchen cabinets for a specific budget is the doors. There are more door options available than most people realize, and each option will affect your overall budget. From cheapest to most expensive, door styles are available as follows:

1) Melamine. These are recessed doors (without panels or profile details), and are available in a wide range of colors and patterns, from solid colors to imitation wood, and many others. Newer “hot melt melamine” doors have a very thin layer of melamine paper applied to a substrate panel type door. They are inexpensive and not very durable. These should not be used near sources of water or heat, or where frequent washing is required.

2) Wood veneer. These are pocket doors made of a thin layer of wood on a substrate material. Birch, maple, oak and ash are all in the same price range, while any exotic or rarer wood (mahogany, cherry, walnut …) will increase the cost. These are often found in modern style kitchens.

3) Wooden structure with veneered panels. These doors have solid wood frames and recessed panels flush with veneer substrate. A common style among these types of doors is Shaker. The wood species chosen will affect the price.

4) Plastic laminate. It looks a lot like melamine doors, but higher quality and much more durable. A wider range of patterns and colors available. Laminates have a dark brown core, so depending on the laminate color chosen, you may see dark brown lines at all joints, at each edge of each door, and so on.

5) Wooden structure with wooden panels. These have solid wood frames and panels. The panel usually has a raised detail. These are often found in traditional style kitchens. Again, the choice of wood influences the price.

6) Wooden or lacquered frame painted with panels of another material. These doors have wooden or painted lacquer frames and other material used for the panel. The other material can be anything, and it is this other material that will greatly affect the cost. Common panel materials include glass, painted finishes, plastic laminates, metal (drilled, brushed, hammered, etc.), cork, and even wall coverings (such as grass cloth) applied to a substrate.

7) Thermoplastic. These doors are not made by the average cabinetmaker; They are manufactured in the factory. Thermoplastics come in a variety of colors and finishes, but the most common are still bright white and faux wood. More durable and attractive than melamine. About the same price range as wood doors. Some manufacturers now advertise “hot melt melamine”; be careful because they are not the same at all.

8) Painted lacquer. These doors are typically lacquer-painted MDF, but it is the lacquer work that increases the cost because it requires more labor and specialized painting equipment. These are not “painted” cabinets. The lacquer is applied as a spray, over a sprayed primer, and no brush marks or other irregularities are visible. If you choose a special finish, such as glazing, the cost goes up a bit more.

9) stainless steel. These doors are typically not manufactured by a cabinet shop, but are outsourced to a metal shop. They are, without a doubt, the most expensive options for your doors.

Because the finished sides must match the doors, the door selection affects the cabinet itself. Therefore, cabinets for lacquered cabinets will be more expensive than melamine ones. Finished side panels to match any wood door are veneered; solid wood would not be as dimensionally stable (warp or bow) and would be astronomically expensive. Then you should consider the interiors of your cabinets. White melamine inside cabinets is standard unless otherwise requested. The cheapest option, if you don’t like the idea of ​​white, is the matching melamine with the doors. It is not advisable to use a more expensive material inside the cabinets – why spend money on veneers or lacquers that are more likely to be damaged by rubbing pots or dishes against surfaces? And why put a more expensive material that you would later want to protect with shelf liners, so that you would never see wood or lacquer anyway?

Countertops are the other major selection that affects the price. The truth is, there are really only two price groups for counters. Plastic laminate countertops are the inexpensive option, and not a bad choice, as they are very durable and are now available in some incredible textures and patterns, plus they can be adorned with wood or solid surface edging. All other countertop materials tend to be comparable in cost: granite, solid surfaces (Corian, Silestone, etc.), concrete, and stainless steel. Concrete countertops are quite expensive due to the fact that they are still relatively rare and therefore a special item; you can’t buy them anywhere. Ceramic tile countertops are the only real mid-priced option. They require the use of high-quality tiles, otherwise chips and cracks will be inevitable. The grout must also be of high quality and safe for food preparation areas, and it must be sealed. Marble, which is usually slightly less expensive than granite, should not be used in kitchens, as it is porous and prone to staining.

What is most surprising to people is that the finishing touches can also be very expensive. The handles and knobs range in price from about $ 2 each to over $ 30 each. Kitchens generally require around 25 handles, so create a $ 700 price difference right there. A reasonable amount to plan for handles is $ 5 to $ 8 each. The other “budget buster” is accessories. Spice racks, trash cans, drawer dividers, pull-outs, and the like tend to be quite expensive. However, some of these devices are incredibly practical, so try to determine which one you would need and which one appeals to you mainly because they are really cool add-ons.

There is one area you should never skimp on just to save a few dollars, and that is installation. Imperfect installation of even the best-made cabinets will result in doors and drawers that don’t close properly or look poorly constructed. A good rule of thumb is that the specialist who made the item should install any custom-made items.

Cabinets for an average size kitchen can cost anywhere from around $ 7,000 to significantly more than $ 30,000. It is often said that a home kitchen (including appliances, cabinets, flooring, lighting, labor, and more) should cost about 15% of the home’s value, so the kitchen for a $ 250,000 home should cost around $ 37,500 if you like. Follow this budgeting method. There are a few things to consider with this: the size of the kitchen plays a big role in determining the budget; of course, a larger kitchen will be more expensive to remake than a small one; a home built in the 1900s will likely be more expensive to renovate than a home built in the 1970s; your preferences will affect the budget; and this is a figure that was developed as a guide to some extent, you don’t need to follow it. Based on the projects handled by Idealspace Design, we have seen that cabinets (including countertops, handles, and installation) generally amount to about 30% of a total kitchen renovation budget. These figures are to help you develop an idea of ​​the budget range to expect, they vary greatly from project to project.

Auto

Ferrari 348 Challenge sports cars / Serie Speciale

The Ferrari 348 Challenge – A close look at the performance, technical data, features, rivals comparison, history and used prices of this classic sports car.

from classic to modern

The Ferrari 348 Challenge

CAR

Ferrari’s 348 Challenge sports car was a one-make racing series, first created in 1993 and aimed at amateur drivers. It was initially established in Europe and, within a year, it had spread to the United States.

Originally the series focused on 348 converted Speciale Series cars, but was later expanded to 348 starting in 1989 that reached the 348 SS specification.

In 1994, Ferrari introduced a limited edition of only 45 cars, consisting of 32×348 TB and 13×348 TS, destined for the American market, which were designated as 348 Factory Challenge.

Sports cars in the Speciale Series featured thresholds painted the same color as the rest of the car, and this feature was carried over to the Challenge Series.

These Challenge cars had road trims and each received an individually numbered plaque that was affixed to the right door frame.

They were equipped with improved engine control units, a large heat shield, and a less restrictive exhaust system, although there was a racing version that used straight pipes. Also included were:

  • Points to attach the harness

  • Mounting points for roll cage

  • aluminum pedals

  • Brake ducts under the car

  • Tow hooks on both ends of the car

  • Stiffer springs

  • Fiberglass front and rear bumpers.

  • Leather-wrapped steering wheel with “348” insignia

The cost of the optional Ferrari Challenge kit was $ 14,000, and they indicated that, with this kit, it would take around 60 man hours to convert the original car into race equipment.

The 3.4 liter double overhead cam V8 engine used in the Challenge Series would develop an increase of 320 hp.

The resulting racer would use slick tires and have an improved braking system and improved aerodynamics.

The 1995 season was the last in which the 348 Challenge car was entered in the races, as, at the time, it had been superseded by the Ferrari 355 Challenge model.

The Ferrari 348 Serie Speciale

CAR

Ferrari’s Serie Speciale sports car referred to a limited edition of 100 modified versions of the 348 TB and TS that was built between 1992 and 1993, and was aimed solely at the American market.

Since the rear wheels used wider tires, the rear track was increased by two inches. It was also equipped with:

  • Free flow exhaust system

  • Upper final drive

  • Front divider

  • New front and rear grill

  • Alternative taillight assembly

  • Bumpers and rocker covers marching the color of the car.

  • Sports seats and door panels, both trimmed in leather.

Each sports car was individually numbered with a special plate affixed to the passenger door post.

Finally, in 1994, another 15 units were built as a result of favorable demand.

THE MOTOR

The 348 Series Speciale was powered by the same 3.4-liter dual-overhead cam V8 engine that was fitted to the original variants.

However, this unit was slightly modified and developed 312 bhp at 7200 rpm, while still producing the same top speed, but with a marginal reduction in 0-60 mph time of 5.3 seconds.

COMPETENCE

A competition cross section for the 348 Challenge and Series Speciale cars included: Corvette ZR1, Honda NSX and Marcos LM500. Ferrari performance:

This marks the end of my Ferrari 348 Challenge and Special Series Sports Car Review.

Digital Marketing

How to get a good page rank on Google?

All companies and service providers, with an online presence, want to have a high Page Rank in Google, for obvious reasons.

But is getting high results on the search engine ranking page (SERP) a piece of cake?

Not!

If that had been the case, all of the company’s websites and web pages would have been on the first page of Google and other search engines. And, the various search engine optimization (SEO) agencies would not have been working overtime to improve the ranking of their clients’ pages, through different innovative and creative methods.

Why is this so?

Google follows a specific set of algorithms. Keep updating to improve the way search results are provided.

Over the years, the biggie search engine has morphed into a knowledge search engine from an information search engine.

Now if you want your pages and sites to rank high, think outside the box and provide relevant, valuable and well-written information, in a way that your readers will easily notice.

This is not to suggest that common SEO practices, including optimized meta titles and descriptions, structured URLs, user-friendly navigation, image optimization, Google authorship certification, etc., are not more relevant.

They still are. Without working on these aspects, you cannot expect to get a high Page Rank on Google.

What else?

Content is king.

Despite other factors at play, content is still the leader.

If your content is new, good, relevant and informative, and of course not buttoned up or full of verbiage, your sites and pages will attract decent business and traffic.

However, having quality content alone may not be enough.

You must promote and share it aggressively, via blog links and website URLs, and via:

1. Discussion forums, also known as open knowledge forums

2. Question and answer sites (Quora)

3. Pinterest (for sharing images)

4. Social bookmark sites (digg, delicious, reddit)

5. Good article sites (E-zine)

6. Social networking sites (Facebook, LinkedIn, Instagram and Twitter)

7. Blog directories (Blog Lines, Bloggapedia)

8. Video sites (YouTube, TikTok)

Also, use relevant, famous and respected sites to post your posts in the Guest Posts section. To do this, write very well and provide high-quality, relevant content.

Also, use the Infographic option as well. SlideShare is an excellent tool for creating infographics.

Shared content with quality, supporting images, in a sequence, would do wonders to improve your Google page rankings.

Inorganic or payment methods

For instant results, use inorganic or payment methods, such as Pay-Per-Click (PPC).

PPC gives advertisers the opportunity to put their brand, product or service, in a very important position, in the form of an ad that targets a particular keyword or phrase.

PPC will get results very fast, although only for a short time. For long-term high Page Rank on Google, organic methods will be suitable.